Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 70:45

Date User Activity Issue Comment Hours
07/25/2023 Joanne Cai Design User Story #686: Meet with Software for Requirements Drafting 2:00 Actions
07/25/2023 Joanne Cai Design User Story #685: Meet with Mechanical for Requirements Drafting 2:00 Actions
07/24/2023 Priya Manavalan Development User Story #685: Meet with Mechanical for Requirements Drafting 1:00 Actions
07/24/2023 Priya Manavalan Development User Story #686: Meet with Software for Requirements Drafting 2:00 Actions
07/24/2023 Ben Harbarenko Design User Story #690: Machining Plates Lower plate machined 3:30 Actions
07/24/2023 Priya Manavalan Development User Story #660: Con Ops Section 3.3 10:00 Actions
07/21/2023 Ben Harbarenko Design User Story #689: Running Random vibrations Setting up shaker PC with all software 2:00 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Made small changes to machining toolpaths 1:00 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Generated better tool path for lower plate 0:30 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Measured finished top plate. Documented work 0:45 Actions
07/20/2023 Sally Palmers Design User Story #667: con ops section 4 3:00 Actions
07/20/2023 Ben Harbarenko Design User Story #690: Machining Plates Top plate machined 3:30 Actions
07/19/2023 Sally Palmers Design User Story #657: Section 1.2.1 2:00 Actions
07/19/2023 Ben Harbarenko Design User Story #690: Machining Plates met with elko people to discuss machining plan 1:30 Actions
07/19/2023 Ben Harbarenko Design User Story #690: Machining Plates top plate tool paths made. Need to check with elko 1:30 Actions
07/18/2023 Ben Harbarenko Design User Story #690: Machining Plates 1:30 Actions
07/18/2023 Sally Palmers Development User Story #657: Section 1.2.1 2:00 Actions
07/17/2023 Ryan Bererton Development User Story #700: Initial Request for Quotes from Vendors Sent out all the initial requests for quotes. Will follow up as responses come back. 5:00 Actions
07/17/2023 Ben Harbarenko Design User Story #690: Machining Plates Installed fusion on workstation. Started on top plate machining plan 3:00 Actions
07/17/2023 Christian Chenard Development User Story #664: con ops section 3.5 Combined with section 3.1 1:00 Actions
07/16/2023 Ryan Bererton Development User Story #640: Mission Objectives for Building an ADCS Detailed the appropriate section in the recommendations document and the potential paths for Ex-Alta 3. 0:30 Actions
07/16/2023 Ryan Bererton Development User Story #639: Make an Estimate of the Team Size Needed to Build Described in the recommendations document how the time size would need to vary with the component. Any more specificity is useless until a component is chosen. 0:30 Actions
07/14/2023 Ryan Bererton Development User Story #677: Finalize List of All ADCS Systems to be Considered for Ex-Alta 3 Did a search online and made a list of all the relevant ADCS modules. If any more are found, they can be added to the list. 0:30 Actions
07/14/2023 Ben Harbarenko Design User Story #690: Machining Plates Updating as-built CAD 2:00 Actions
07/13/2023 Ryan Bererton Development User Story #642: Questions from the SMAD Workbook Finished the list of questions, wrote out all solutions, and asked for a review. The review will be a bit because it is low priority. 1:15 Actions
(1-25/35) Per page: 25, 50

Also available in: Atom CSV