Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 2003:53

Date User Activity Issue Comment Hours
07/19/2023 Ben Harbarenko Design User Story #690: Machining Plates met with elko people to discuss machining plan 1:30 Actions
07/19/2023 Ben Harbarenko Design User Story #690: Machining Plates top plate tool paths made. Need to check with elko 1:30 Actions
07/18/2023 Ben Harbarenko Design User Story #690: Machining Plates 1:30 Actions
07/18/2023 Dipesh Aggarwal Design User Story #665: Dipesh and Yeh-In Review Things 1:00 Actions
07/18/2023 Dipesh Aggarwal Design User Story #508: Optics Documentation Reading and Review 6:00 Actions
07/18/2023 Ryan Bererton Development User Story #662: Investigate CubeSpace ADCS Issues Sent a follow up email to Alex with some more questions 0:30 Actions
07/18/2023 Sally Palmers Development User Story #657: Section 1.2.1 2:00 Actions
07/17/2023 Ryan Bererton Development User Story #700: Initial Request for Quotes from Vendors Sent out all the initial requests for quotes. Will follow up as responses come back. 5:00 Actions
07/17/2023 Ben Harbarenko Design User Story #690: Machining Plates Installed fusion on workstation. Started on top plate machining plan 3:00 Actions
07/17/2023 Christian Chenard Development User Story #664: con ops section 3.5 Combined with section 3.1 1:00 Actions
07/17/2023 Connor McNeill Design User Story #308: Optical Configuration Research and Zemax Design 16:00 Actions
07/17/2023 Ben Harbarenko Design User Story #691: Compile mechanical requirements 1:30 Actions
07/16/2023 Ryan Bererton Development User Story #640: Mission Objectives for Building an ADCS Detailed the appropriate section in the recommendations document and the potential paths for Ex-Alta 3. 0:30 Actions
07/16/2023 Ryan Bererton Development User Story #639: Make an Estimate of the Team Size Needed to Build Described in the recommendations document how the time size would need to vary with the component. Any more specificity is useless until a component is chosen. 0:30 Actions
07/16/2023 Ryan Bererton Development User Story #684: Gather Questions for CubeSpace Talked to Andre about what we need to ask to make sure current and potential future ADCS systems from CubeSpace work for us. 1:00 Actions
07/14/2023 Ryan Bererton Development User Story #677: Finalize List of All ADCS Systems to be Considered for Ex-Alta 3 Did a search online and made a list of all the relevant ADCS modules. If any more are found, they can be added to the list. 0:30 Actions
07/14/2023 Ben Harbarenko Design User Story #690: Machining Plates Updating as-built CAD 2:00 Actions
07/14/2023 Ben Harbarenko Design User Story #691: Compile mechanical requirements Created Completion sheet. Copied N.S. Requirements into sheet 1:00 Actions
07/13/2023 Ryan Bererton Development User Story #642: Questions from the SMAD Workbook Finished the list of questions, wrote out all solutions, and asked for a review. The review will be a bit because it is low priority. 1:15 Actions
07/13/2023 Ben Harbarenko Design User Story #676: Thermal Stage Disassembly Procedure. Stage disassembled. Process documented 1:00 Actions
07/13/2023 Ryan Bererton Development User Story #461: Requirements Definition Discussions - ADCS Brainstormed functional requirements, next is porting EX2 requirements 1:30 Actions
07/13/2023 Ryan Bererton Development User Story #638: Set a go/no go Date for the Build vs Buy Decision Set the date just before the requirements are due to be sent for configuration control. 0:15 Actions
07/13/2023 Ben Harbarenko Design User Story #689: Running Random vibrations Successfully ran random profile on AWG 2:00 Actions
07/12/2023 Ben Harbarenko Design User Story #688: Investigate shaker table capabilities and possible upgrades. Wrote Email to UD looking into upper limits of our system 0:45 Actions
07/11/2023 Connor McNeill Design User Story #602: Learn Zemax and any Associated Optics 6:00 Actions
(451-475/720) Per page: 25, 50, 100

Also available in: Atom CSV