Project

General

Profile

Spent time

Filters

Apply Clear

Hours: 2003:53

Date User Activity Issue Comment Hours
07/25/2023 Ben Harbarenko Design User Story #702: Shaker Data Gathering Working data analysis. Made script to streamline process. PSD plot not lining up and GRMS is consistant across all tests so far 6:00 Actions
07/25/2023 Ryan Bererton Development User Story #461: Requirements Definition Discussions - ADCS Had another discussion about the requirements and it is now on ADCS to justify them. 1:00 Actions
07/25/2023 Nabiha Saghar Design User Story #314: Revisit Ex2 Optical Simulations within Zemax 1:00 Actions
07/25/2023 Joanne Cai Design User Story #686: Meet with Software for Requirements Drafting 2:00 Actions
07/25/2023 Joanne Cai Design User Story #685: Meet with Mechanical for Requirements Drafting 2:00 Actions
07/24/2023 Priya Manavalan Development User Story #458: Power Requirements Definition - Finish 1st Draft 2:00 Actions
07/24/2023 Priya Manavalan Development User Story #683: ADCS Requirements Definition - Finish 1st Draft 3:00 Actions
07/24/2023 Priya Manavalan Development User Story #685: Meet with Mechanical for Requirements Drafting 1:00 Actions
07/24/2023 Priya Manavalan Development User Story #686: Meet with Software for Requirements Drafting 2:00 Actions
07/24/2023 Priya Manavalan Development User Story #682: Populate Internal Project Risks Tab 1:00 Actions
07/24/2023 Ben Harbarenko Design User Story #702: Shaker Data Gathering Failed to create accurate frequency plots. Read into previous testing. They had better success using LJstream so I will proceed using this application instead 3:00 Actions
07/24/2023 Ben Harbarenko Design User Story #688: Investigate shaker table capabilities and possible upgrades. Researching hardware from random vibrations research for a data gathering solution 2:00 Actions
07/24/2023 Ben Harbarenko Design User Story #690: Machining Plates Lower plate machined 3:30 Actions
07/24/2023 Dipesh Aggarwal Design User Story #508: Optics Documentation Reading and Review 3:00 Actions
07/24/2023 Dipesh Aggarwal Design User Story #665: Dipesh and Yeh-In Review Things 1:00 Actions
07/24/2023 Priya Manavalan Development User Story #660: Con Ops Section 3.3 10:00 Actions
07/22/2023 Yeh-In Kang Development User Story #665: Dipesh and Yeh-In Review Things Combed through Ex2 Iris mechanical docs and reviewed optomechanics 3:30 Actions
07/21/2023 Ben Harbarenko Design User Story #702: Shaker Data Gathering Set up PC. Generating plots from data gathered in LJLOGM. So far not accurate 2:00 Actions
07/21/2023 Ben Harbarenko Design User Story #689: Running Random vibrations Setting up shaker PC with all software 2:00 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Made small changes to machining toolpaths 1:00 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Generated better tool path for lower plate 0:30 Actions
07/21/2023 Ben Harbarenko Design User Story #690: Machining Plates Measured finished top plate. Documented work 0:45 Actions
07/20/2023 Sally Palmers Design User Story #667: con ops section 4 3:00 Actions
07/20/2023 Ben Harbarenko Design User Story #690: Machining Plates Top plate machined 3:30 Actions
07/19/2023 Sally Palmers Design User Story #657: Section 1.2.1 2:00 Actions
(426-450/720) Per page: 25, 50, 100

Also available in: Atom CSV